7
CANOPY AND COVER INSTALLATION
FAN BLADE INSTALLATION
Step 1.
Remove the bolts and flat washers pre-installed
on the blade holder underneath the fan motor
assembly.
Step 2.
Fit the blades in place on the blade holder.
Step 3.
Making sure the blades are straight, secure
them by replacing and retightening the bolts and
washers.
Step 1.
Tuck all the connections neatly into the outlet box.
Step 2.
Slide the canopy up to the ceiling mounting bracket and place the key hole slots
over the mounting screws or bolts on the bracket. Rotate the canopy until the
screw or bolt heads lock in place at the narrow section of the key hole.
Step 3.
Attach the canopy cover to the bottom of the canopy and screw it into place.
Ceiling Mounting
Bracket
Canopy
Canopy Cover
Bolts
Outlet Box
Bolts and Washers
Bolts and Washers
Blades