Assembly - Installing the Light Kit
Attaching the glass bowl
Attaching the light kit fitter assembly
10
11
□
□
□
□
Place the glass bowl (K) into the light kit assembly (G) ,
aligning the three flat areas on the top flange of the glass
bowl (K) with the three raised dimples in the light kit
assembly (G). Turn the glass bowl (K) clockwise until it
stops.
Connect the wires from the light kit fitter assembly (G) to the
wires from the switch cup of the fan motor assembly by connect-
ing the molded adaptor plugs together (
blue to blue,orange to
orange
). Carefully tuck all wires and splices in the switch cup.
Align the three screws (LL) on the switch cup cover of the light kit
fitter assembly with the three key slots in the switch cup.
Position the light kit fitter assembly on the switch cup
and turn it clockwise until it locks. Tighten the three screws (LL) that
were loosened in first step to secure the light kit fitter assembly (G).
Loosen the three screws (LL) on the switch cup cover of the
light kit fitter assembly.
12
Item # 1000*****/1000*****
Item # FC132-BJRL/FC140-BJRL
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
