4
Power setting
Turn the power knob to desired heat setting.
1.
Ⅰ
is for the Low power (400 watts) without oscillation function.
2.
Ⅱ
is for the High power (800 watts) without oscillation function.
3.
is for the Low power(400 watts) with oscillation function.
4.
is for the High power(800 watts) with oscillation function.
5. OFF: To disconnect heater, turn power knob to“OFF”position (off), and turn timer to“OFF”
then remove the plug from outlet.
Timer setting
Turn the timer knob to desired timer setting.
1.ON indicates Power and Timer are turned on.
2.OFF indicates Power and Timer are turned off.
3. Timer settings are in increments of 10 minutes up to a maximum of 60 minutes.
Note
: Do not force knob beyond its normal stop position.
Automatic Tip-over Safety Switch:
The Tip-over safety switch is located as bottom of the base. The tip-over safety switch allows the
unit to operate only when the heater is placed on a level surface. If the heater is tipped or tilted
while in operation, it will automatically shut off.
Overheating protection:
There is an overheating protector inside, if this heater overheats by accident, this heater will shut
off automatically.
SAFETY FEATURES
