6: Connect the second wire from the transformer
to terminal 4 on the HE106 and the connect a
wire from terminal 5 to the second terminal on
the HomeEasy Door Lock.
Then set dip-switch 3 to the "On" position.
1
6
5
4
3
2
1 2 3 4 5 6 7
HomeEasy
Door Lock
Transformer
Product Specification:
Remote Control: HE-106
Input: 12V DC 800mA
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Indoor Use Only
Warning:
Never Exceed the Product
HE-Dooor Lock:
Input: 12Vac~ 300mA
Indoor Use Only
C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
Tel: 0845 2301231
Fax: 01527 557701
Web: www.chbyron.com
E-mail:
support@chbyron.com
Contact:
Helpline: 0845 2301 231
1
6
5
4
3
2
easy
HOME
II
III
I
IV
On
Up to Six remote control units can be paired with the HE-106 unit.
To program a HomeEasy Remote Control with the HE-106, set dip-switch 1 to the
"On" position and then press the "On" button on the HomeEasy remote control
(Except HE200 Remote Control).
Deleting Remote Control:
To delete a remote control that has been paired with a HE-106, set dip-switch 1 into
the "On" position and then press the "Off" on the paired remote control. The HE-106
will bleep twice to indicate that the remote control bas been deleted from the
memory of the HE-106, set dip-switch 1 back to the "Off" position.
HE-106 Memory Reset:
To delete all the remote control units paired with a HE-106, set all the dip-switches
into the "On" position, remove the SX37 from the socket and wait for 10 seconds.
The LED light will stay on and the unit will bleep twice, now set all the dip-switch to
the "Off" position, the led will now flash once every 3 second and make a long
continuous bleep, the HE-106 has now been reset.
Pairing/Deleting with Remote Control:
The HE-106 will bleep twice to indicate that the remote control is paired to the
HE-106, set dip-switch 1 back to the "Off" position, the HE-106 can be tested by
pressing the "On" button on the remote control.
1
6
5
4
3
2
ON
Example Remote control
Oparation:
Open Door:
Lock Door:
Test:
1
6
5
4
3
2
ON
Press the "On button on a paired HomeEasy Remote Control, for the
HE-100 press and hold the lock key.
Press the "Off" button on a paired HomeEasy Remote Control, if no lock
command is received by the HE-106 it will automatically lock after
30 seconds. For the HE-100 release the lock key.
The HE-106 can be set into a test mode by setting dip-switch 2 to the
"On" position.
The HE-106 will make 3 short bleeps when a "On/Off" command is
received, while in the test mode the door lock will not operate.
To exit the test mode set dip-switch 2 to the "Off" position.
