INSTRUCTIONS FOR USE
10
ENGLISH
1. Switch-On
1.1 First of all put the temperature adjust scale to the position
„OFF“ and then assert the automatic temperature controller
in the holder “A”.
If the temperature controller isn’t fixed properly, a very high
temperature can arise which can cause injuries or damages
to the appliance. Please ensure that the temperature control-
ler is plugged in correctly.
1.2 Then put the plug in a 230 volt safety-contact power outlet.
1.3 Please use the temperature adjust scale different concerning the meal
you are preparing.
The temperature sensor is designed to maintain the temperature, this means, during the whole
preparation the control lamp will flash up and the light will turn off from time to time.
Scale setting at the controller
MIN = least temperature level = keep warm function
1-2 = temperature range up to 100°C approx.
3-4 = temperature range up to 200°C approx.
5 = max. temperature range up to 240°C approx.
OFF = heating is off
Caution: In position “Off” the pan can still be extremely hot over a
longer period
2. Cooking
2.1 Please wait 5 – 10 minutes after you have switched on the device. If the control light has turned out
you can start with the cooking.
2.2 If the food is cooked completely you can maintain the temperature of the food by turning the tempe-
rature controller back to the position „0“.
•
During the use of this appliance pops can occur. This is not a malfunction. Due to the thermal
expansion of the heater and of the hot plate these pops arise.
•
Do not lay your hand under the reflector; do not lay any inflammable material on the Profi Party
Pan.
