6
ENGLISH
CaUTiOn:
Before connecting and removing the beaters, make sure whether
the mixer is turned off and a slider for speed selection is on zero / OFF. Do not
place any accessories into the bowl while the mixer is running (spatulas, spoons,
knives, etc.). Failure to follow these instructions can cause injuries, such as broken
bones, cuts or other serious injuries.
aCCeSSOrieS STOrage
hOW TO USE ThE APPlIANCE
COnneCTing Of THe Mixer beaTerS WiTH THe bOdy
bUrST bUTTOn
Now you can dispose all parts of the mixer at the
same place. After use, dispose clean beaters into
the box. Close the box and gently press until it
snaps into place.
Check whether the mixer is turned off and whether the slider for speed selection is at zero /
OFF. Insert the tip of the beaters into the hole on the underside of the mixer body. Press inward
until it clicks. Repeat the same process with the second beater.
1. Check whether the mixer is turned off and whether the slider for
speed selection is at zero / OFF.
2. Connect the desired beaters.
3. Plug in the power supply.
4. Put selected ingredients in the mixing bowl.
5. Lower the mixer / beaters in the bowl for mixing.
6. The slider for speed selection set to 1 and, if necessary, increase
the speed.
Press the switch and hold it. The speed you
have chosen will be increased by another half to
the next in the selection. Do not use this switch
more than 2 minutes, because you can overheat
the engine.
Burst button
Summary of Contents for HM-3001W
Page 1: ...INSTRUCTION MANUAL Hand Mixer HM 3001W ...
Page 45: ......
Page 46: ...www home electronics info ...