HE-KT181
2
RUS
.
.
,
.
,
.
.
.
.
,
.
.
.
,
.
,
,
.
.
,
.
,
.
.
(
,
),
,
.
.
.
,
.
.
,
.
,
,
.
,
.
.
,
.
.
,
,
,
.
“MAБ”
.
.
.
.
.
,
.
“MIN”,
.
“MAБ”,
.
.
. /
.,
,
.
,
.
,
,
15
-
20
.
.
(
,
).
,
,
,
.
.
.
GBR IMPORTANT SAFEGUARDS
When using electrical appliances, basic precautions should always be followed, including the following:
Read all instructions thoroughly before using the appliance. Do not use or store the unit in damp and moist
areas where it may come in contact with water. Keep out of the reach of children. Do not immerse the unit,
cord, plug or power base in water or other liquid. Use the handle to carry or move the unit, as the surface
may be hot after use and to avoid scalding from hot liquid. Use caution to not touch the power base or
bottom of the kettle after use to avoid scalding or burns.
Close supervision is necessary when this appliance is to be used by or near children. Unit must be operated
on a flat surface away from the edge of counter to prevent accidental tipping. Use the appliance only on the
voltage specified on the identification plate. Do not use the kettle if it has been damaged or modified or
appears to have malfunctioned in any way. Do not operate the kettle with a damaged or incorrect cord or
plug. This kettle is intended for heating water only. Use of any other liquids or food may damage the interior
and void warranty. Do not allow the cord to hang over the edge of the table or counter, or contact any hot
surfaces. This kettle is designed for Household use only! Do not use outdoors. When not in use and before
cleaning, disconnect the kettle from the outlet. Allow the kettle to cool completely before attempting to clean.
Do not remove the lid during the heating cycle. Scalding may occur. Do not operate the kettle without water.
If the unit overheats, please allow the unit to cool for at least 15 minutes.
Do not fill above the MAX line; this may cause water to overflow, which may cause scalding. Steam may
damage walls or cabinets, during use turn the spout away from walls toward an open space; use heat
resistive pads under the kettle to prevent damage to wood finishes. Do not place or use the unit on or near a
hot gas or electric burner or in a heated oven. Never operate the appliance when the lid is open or removed.
To remove from the power source, turn the unit OFF and pull the plug from outlet. Never pull by the cord. To
reduce the risk of fire or electrical shock, do not remove the bottom cover. Do not use for kettle for other than
intended use.
To prevent discoloration, do not place tea bags, coffee, instant noodle, or any other liquids or items inside
the kettle.
Do not wash under direct running water as this will damage the control panel. Clean with a soft moist cloth.
Do no use or store the unit in direct sunlight or near other heat sources (oven, stove, etc.).
The kettle may have difficulty bringing water to boil when used in high altitudes or extreme cold conditions.
Do not disassemble or attempt to repair on your own.
BEFORE INITIAL USE
Remove all packaging materials. Fill kettle to the MAX line and bring to a boil. When the unit completes the
boiling cycle, discard the water - repeat the process 2 to 3 times. This will remove any dust or residue
remaining from the manufacturing process.
BOILING WATER
Remove the unit from base. Open the cover by depressing the button near the handle. Fill the kettle with
your desired amount of water. Do not fill above the MAX line.
Close the lid by pressing down gently until it locks (clicks) into place.
Place the kettle on base, ensuring that it is correctly engaged.
Connect cord to power outlet and switch unit ON; the power indicator lights up.
The kettle will switch off automatically when water has come to a boil.
After use, unplug and empty unused water. Ensure kettle is switched off before removing from base.
Heating can be stopped at any time by the operating the switch.
As a safety feature, the unit may not start immediately after shutting off.
