20
Items displayed in blue or grey can be touched to edit or obtain more information. Items
displayed in black are for information purposes only and cannot be selected.
In the top left corner of the screen, you will find the current day of the week and time.
In the top right corner, there is an indicator that will tell you when the next “regeneration” or
flush cycle is scheduled to occur.
In the middle of the screen is the regeneration cycle wheel which indicates the current valve
cycle (indicated in green), and other applicable cycles (in black).
The bottom menu bar provides the following options:
Vacation:
Select this icon to set your water filter system to vacation mode. This mode can
be used if you will be away for an extended period of time and will not be using water.
When vacation mode is selected, the system will temporarily cease flush cycles. Upon
returning from vacation, it is important to remember to end the vacation mode by pressing
the same icon. When in vacation mode, “Vacation Mode” will be displayed in the top right
corner of the screen.
Assistance:
Select this icon to display the name and phone number of your dealer.
Diagnostics:
Select this icon to enter the Diagnostics Mode - see Diagnostics Mode below
for more details.
Settings:
Select this icon to edit the time of day that the flush cycle will occur. Other
programming functions can be accessed using this icon, however, it is strongly
recommended that you do not change any settings without first discussing with your dealer.
Regeneration:
Select this icon to schedule a flush cycle to occur immediately or the next
time that the time of day equals the regeneration (flush) time.
The touch screen has an energy-saving feature that will turn the display off (sleep mode) if
no user input has been made for 5 minutes. To turn the screen back on, just touch it.
We will first set the time of day to the correct time. The current day of the week and time is
displayed in the top left corner of the home screen. It is important that the day and time be