Router Setup
1)
Unplug the power & ethernet cables from your modem (Cable, DSL
or Fiber). If your modem has a battery, remove it.
2)
After waiting one minute, if needed, re-insert your modem’s battery.
Plug the power adapter of the modem back into the wall outlet.
3)
Wait for one minute. Plug the power adapter of HomeScreen™ into a
power outlet and connect your modem to HomeScreen’s™ WAN port
using the included ethernet cable. Device may take a minute to initialize.
4)
Follow the on-screen instructions on HomeScreen’s™ touch interface.
HomeScreen™ device,
stylus, and stand
Ethernet Cable
Power Adapter
Included in the box:
Stylus
WAN port
2 LAN Ports
USB 2.0
Power
Stand
wizard
wifi settings
extend
network
security
status
settings
