Home HME020020N, Instructions Manual

8

CLEANING AND MAINTAINING YOUR COMPACT AIR PURIFIER

WARNING:

 Always make sure the appliance is turned off and unplugged before cleaning.

Follow the steps below to change the filter in your appliance: 

1. 

Rotate the bottom cap counterclockwise to open and detach the bottom cap as shown 

in figure 1 below. 

2.  To change the filter, please remove the old HEPA filter from the appliance and insert the 

new filter as shown in figure 2 below. 

3.  Place the bottom cap back onto the appliance and twist clockwise till you hear it click in 

place. This indicates that the bottom cap is fastened to the appliance appropriately.

4.  Use a thin object like a toothpick to press the “change filter indicator” for 3 seconds. The 

indicator will flash and the buzzer will sound 3 times indicating  the filter has been reset 

successfully. 

5.  The appliance can now be operated normally after being plugged in.

Cleaning the surface of the housing

1. 

Turn off the appliance and unplug the adapter.

2.  Use a soft cloth to clean the surface of the housing.
3.  Place the air purifier in a  well ventilated environment, do not expose to the sun directly 

and only turn it on when it is thoroughly dry.

WARNING:

 Do not clean the appliance with water or any other detergent. If water or cleaning 

detergent gets into the appliance, damage may occur. 

Fig. 1

Fig. 2

Fig. 3

HEPA Filter w/ 

Active Carbon

Press for 3 seconds to reset the 

“Change Filter” indicator.

Bottom Cap

Adapter

Connector