REPLACING YOUR FILTER
1. Press the “on/off” button to turn OFF your appliance.
2. Make sure to unplug the appliance from the outlet.
3. Rotate the bottom cap anticlockwise to open and detach the
bottom cap (see figure 1)
4. To change the filter, please remove the old HEPA filter from the
appliance and insert the new filter as shown in figure 2 below.
5. Place the bottom cap as shown and twist clockwise till you hear
it click in place. This indicates that the bottom cap is fastened to
the appliance appropriately.
6. To reset, use a thin object like a toothpick to press the “filter
change indicator” for 3 seconds. The indicator will flash and the
buzzer will sound 3 times indicating the filter has been reset
successfully.
(see figure 3)
7. The air purifier can now be operated normally after being
plugged in.
8. If you have any further questions, please contact the
hOme
®
Customer Support hotline at
1-800-898-3002
or
visit
homelabs.com
to chat with a customer support agent.
WARNING:
Always make sure the appliance is
turned off and unplugged before cleaning.
HEPA Filter w/ Active Carbon
Bottom Cap
Adapter
Fig. 1
Press for 3 seconds to reset the “Change Filter” indicator.
Fig. 2
Fig. 3
OPEN
CLOSE
