18
Navigating on the first level of EPG (Multi-EPG)
The currently active channel and the
current programme are highlighted.
Depending on how the EPG data is
transmitted by the broadcaster it is
possible that programme information
is not available until one has actually
selected the channel. Move the cursor
up or down and confirm with the OK
key to change to another channel in
the list.
Move the cursor left or right to move to another time of the current day. Use the
blue key to advance to the next day and use the yellow key to go back by one
day.
For your orientation, please also note the timeline indicating the current time in
comparison to the programmes. For more detailed Information on a programme,
press the “i” INFO key. Please note that not all broadcasters provide EPG or
detailed EPG data.
If you wish to add a programme to your timer for recording, move the cursor to
the desired programme and press the REC key on your Remote Control. The
event is added to your Record List and, provided a USB Hard-Disk-Drive is
connected at the set time, and provided it has enough free space, the event will
be recorded to this USB device. Please press the MENU key to return back to
the EPG Menu confirming that you want to save the new event in your Record
List.
Please note:
The receiver requires time to boot from Standby and to check the
current time from the satellite signal and to descramble the programme including
check for new keys for the inserted Irdeto smartcard. When adding an event to
the record timer, please allow at least 7-8 minutes before the recording is to
begin.
Also, when programming more than one event, please allow time in between
events accordingly. – When programming events via the EPG timer function, you
can manually edit the recording list – also by default, the receiver will add 5
minutes before and 5 minutes after an EPG event – you can edit this padding
time (Start and End individually) in the menu MULTIMEDIA / PVR SETTING
Please also note
, that any user input during an event (via the remote control or
the panel keys) will result in the receiver not returning into standby automatically
after the timer event is over.
Summary of Contents for HDTV-Sat-Irdeto-Receiver
Page 1: ...HDTV Sat Irdeto Receiver...
Page 2: ......
