27
9. 2 Satellite Search
To perform a Channel Search on one
Satellite, please choose the Sub Menu
Satellite Search. Choose the Satellite
you wish to perform the search on
and, in case you have not yet set up
the antenna, please press GREEN
EDIT to make the according changes.
Choose between:
DiSEqC 1.0 (up to 4 ports), DiSEqC
1.1 (up to 16 ports), DiSEqC 2.0
(Motor) and USALS (Motor) and
allocate the according port where
applicable. Now either begin your
search on the entire Satellite by
pressing RED - START SEARCH – or
choose to search on a single TP –
then please press GREEN -
TP SEARCH – by setting the Search Mode in TP Search from Manual to PID,
and, assuming that you know the according data, you can also enter specific
Video-, Audio- and PCR-PID to search for a single Channel.
9. 3 Edit TP List
In due time, and by new Frequencies
constantly being added by the Satellite
Operators, some transponder data will
need editing. Enter the Sub MENU
INSTALLATION
/
SATELLITE
SEARCH,
choose
your
desired
Satellite (confirm with OK) and press
the YELLOW (TP) key. In the EDIT TP
List Submenu you can either manually
add a TP (Transponder) by pressing
Summary of Contents for HDTV-Sat-Irdeto-Receiver
Page 1: ...HDTV Sat Irdeto Receiver...
Page 2: ......
