12
Assembly - Attaching the Fan Blades
Attaching the fan blades
7
□
Attach blade (F) to blade bracket (G) using the screws (FF)
provided. Please note that the rubber washers are pre-
attached to the blade bracket (G). Insert a screw into the
blade bracket (G). Repeat for the two remaining screws (FF).
□
Tighten each screw securely.
□
Repeat for the remaining blades.
F
FF
G
Close-to-Ceiling mounting
6
A
D
C
E
GG
HH
BB
Assembly - Hanging the Fan (continued)
NOTE:
Your fan blades are reversible. Select the blade
side finish which best accentuates you decor.
WARNING:
The locking slots of the ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
□
Carefully unhook the fan from the mounting bracket (A) and
align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock the canopy (C) in place.
□
Immediately tighten the two mounting screws firmly.
□
Install the two mounting screws (HH) and lock-washers
(GG) (saved from Assembly Step 1 “Prepairing for mount-
ing”) into the holes in the canopy (C) and tighten firmly.
□
Install the canopy ring (D) by aligning the ring’s slots with
screws in the canopy (C). Rotate the ring clockwise to lock in
place.
