13
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly - Attaching the blade brackets
Attaching the blade brackets
8
□
Fasten the blade bracket (G) to the motor (E) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (E) and tightening the motor screws that are pre-
assembled to the blade bracket (G).
□
Repeat for the remaining four blade brackets (G).
E
G
F
Operation
Turn on the power and check the operation of the fan. The pull
chain controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
The slide switch (YY) controls the direction of the blades: forward
(switch down) or reverse (switch up)
Warm weather - (Forward) A downward airflow creates a cooling ef-
fect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of
the ceiling. This allows you to set your heating unit on a cooler set-
ting without affecting your comfort.
NOTE:
Wait for the fan to stop before reversing the direction of
blade rotation.
YY
YY
