background image

12

6

Making the electrical
connections

Assembly — Hanging the Fan (continued)

WARNING:

 

Check to see that all connections are tight, 

including ground, and that no bare wire is visible at the wire 
nuts (except for the ground wire).

WARNING:

 

To reduce the risk of fire or electric shock, do 

not use this fan with any solid-state speed control device.

WARNING:

 

To avoid possible electrical shock, be sure 

electricity is turned off at the main fuse box before wiring.

Blue

Black

Green

White

Black

Ground

conductor

White

AA

NN

If you feel you do not have enough electrical wiring 
knowledge or experience, have your fan installed by a
licensed electrician.

Follow the steps below to connect the fan to your 
household wiring. Use the plastic wire nuts (AA) with your
fan. Secure the plastic wire nuts (AA) with electrical tape. 
Make sure there are no loose strands or connections.

     Connect the ground conductor of the 120V supply 

(this may be a bare wire or a wire with green colored 
insulation) to the green ground lead(s) of the fan. 
There are two green grounding leads: one from the 
mounting bracket (A) and one from the hanger 
ball/downrod assembly (D).

     Connect the fan motor white wire to the supply white 

(neutral) wire using a plastic wire nut (AA).

     Connect the fan motor black wire and the blue wire to 

the supply black (hot) wire using a plastic wire nut 
(AA).

     Turn the wire nut connections upward, spreading 

them apart so the green (ground) will be on one side 
of the outlet box (NN) and the white, black and blue 
wire will be on the other side. Carefully tuck the 
connections up into the outlet box (NN).

Summary of Contents for 1003 023 399























Reviews: