2
WARNING DECAL
PLACEMENT
The warning decals shown at the
right have been placed on the
bungee bench.
If a decal is miss-
ing or illegible, contact Customer
Care and order a free replacement
decal.
Apply the decal in the location
shown. Note: The decals may not be
shown at actual size.
Inspect and properly tighten all parts
each time the bun-
gee bench is used. To clean the bungee bench, use a
damp cloth and mild, non-abrasive detergent;
never use
solvents.
Refer to the accompanying instructions to see
how to do exercises on the bungee bench.
UNFOLDING AND FOLDING THE BUNGEE BENCH
To use the bungee bench, pull the rear leg away from
the front legs until the seat frame snaps into the locked
position.
To fold the bungee bench when it is not in use, lift the seat
and then push the rear leg all of the way to the front legs.
250
Rear
Leg
Front
Legs
Seat Frame
in locked
position
ADJUSTMENT
UNLOCKING AND LOCKING THE SEAT
To unlock the seat, locate the latch handle under the seat.
Lift the latch handle, slide it all of the way to the right, and
then press it downward. The seat will then swivel from
side to side while you exercise.
To lock the seat, lift the latch handle, slide it all of the
way to the left so that the latch pin is inserted into the
tab under the seat, and then press the latch handle
downward.
Locked
Position Latch
Handle
Tab
Unlocked
Position
