3
ADJUSTING THE BACKREST
The backrest can be adjusted to either of two positions.
To adjust the backrest, fully insert the brace into the
upper or lower slots in the catch.
Brace
Catch
ATTACHING THE HANDLES AND THE STRAPS AND
ADJUSTING THE RESISTANCE
Each handle can be attached to the upper or lower end of
a black bungee, a red bungee, or both bungees on either
side of the bungee bench.
Each strap can be attached to the lower end of a black
bungee, a red bungee, or both bungees on either side of
the bungee bench.
To increase the resistance of any bungees, slide the free
ends of the bungees onto the C-rings on the front legs
as shown. Note: When the bungee bench is not in use,
remove any bungees from the C-rings.
C-ring
