9
Wire Connectors
Wire Connectors
LED Light Kit
Light Plate
Bolts
Lamp Shade
LIGHT INSTALLATION
Step 1.
Remove the pre-installed
bolts on the fan motor
assembly.
Step 2.
Feed the wire connectors
through the middle of the
light plate. Install the light
plate onto the motor
assembly and secure it by
replacing and retightening
the bolts.
Step 3.
Connect the LED light kit
to the light plate using its
magnetic suction-cup
bolts.
Step 4.
Connect the wire plugs of
the LED light kit to the wire
connectors (blue to blue
and white to white).
Step 5.
Fit the lamp shade onto
the light plate and screw it
into place. Ensure it is
firmly connected to avoid
loosening during use.
COLOR TEMPERATURE ADJUSTMENT
The LED light has 3 different color setting: Warm White (3000K), Daylight (4500K), and
Cool White (6000K). To adjust the light settings,
1. Press
LIGHT
on the remote control to turn on the LED light.
2. Press and hold the the
LIGHT
button until the LED light turns off.
3. Press and hold the the
LIGHT
button until the LED light turns on again with the next
color temperature in order.
Repeat these steps to cycle through the 3 color temperatures.
