On/Off
Before connecting power
source, be sure ON/OFF
controls are in the OFF
position. Slide button to the
ON position to activate con-
tinuous massage mode.
Targeted
Massage
Buttons
Press to activate
massage of
specific areas:
neck/shoulders,
back, buttocks,
thighs and
calves/feet. Custom
program your massage
by choosing a specific
area, any combination of
areas, or all five. The corre-
sponding L.E.D. lights will
illuminate to verify your
selection. To deselect, simply
press the buttons again and
their corresponding L.E.D.
lights will turn off.
Power Adapter
Body Masseur is powered
by a custom 120 volt AC
home adapter, included
with your unit.
Massage
Strength
Choose the intensity of
your massage. Body
Masseur gives you three
options of massage
strengths: low (L),
medium (M) and
high (H). L.E.D. lights cor-
respond to your
selection. To change
the strength of your
massage, simply
press the corre-
sponding button.
Special Functions
Body Masseur incorporates 3
exclusive preprogrammed
functions that can be easily
selected by pressing the
SPECIAL FUNCTIONS
button. Once activated, you
can move from one function
to another by simply press-
ing the button again. All 3
special functions allow you
to choose the body zones
activated, and the speed and
intensity of your massage.
(F1) Pulsating
Massage:
All 10
vibrating motors turn
on and off, giving you
an intense pulsating
massage.
(F2) Side-to-side
Massage:
Switches
the massage back and
forth, from your left
side to your right.
(F3) Circulating
Massage:
Massage
runs in circular fashion
around the cushion
surface, to reflect your
blood’s circulation.
Body
Masseur
10-motor Full Body Massager
Heat
Soothing, penetrating heat is
activated with this button. To
turn off heat, simply press the
button again. A glowing L.E.D.
light indicates that heat is on.
Note:
When selecting the
heat feature with massaging
action, there will be a slight
decrease in the strength of
the massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
Cycle
Press CYCLE to activate
traveling massage. The L.E.D.
light corresponding to the
cycle button on the hand
control will illuminate to verify
your selection. Motors will
alternate massage action,
starting at your neck and
shoulders and travelling down
to your feet, up and down the
cushion’s surface. To deac-
tivate cycle action, simply
press the button again and the
corresponding L.E.D. light will
turn off. At any time, you may
disengage any one or any
combination of massaging
motors. When you do, corre-
sponding L.E.D. lights will
indicate your selection.
Cycle Speed
Choose the speed at which
your custom programmed
massage travels up and
down Body Masseur. With
each press of the button,
the cycle speed increases,
creating three levels: low (L),
medium (M) and high (H).
Corresponding L.E.D. lights
will indicate your selection.
To decrease speed, simply
press the button again.
7
6
revisedbms-10h 9/21/01 3:12 PM Page 7
