7
Heat
Soothing, penetrating heat is
activated by pressing this
button. To turn off heat, simply
press the button again. The
glowing L.E.D. light indicates
that heat is on.
PLEASE NOTE:
The heat
option will only work while
a massage feature is
selected.
NOTE:
When selecting
the heat feature with
massaging action, there
will be a slight decrease
in the strength of the
massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
6
Pressure
Activated
Switch
Heat
Targeted
Massage Zones
Activate massage motors to
target specific areas in the
body. Customize your
massage program by
choosing any combination of
zones or all four at once. To
select a zone, slide the upper,
middle, lower or legs switch to
either low (L) or high (H). The
corresponding L.E.D. will
illuminate. To deselect a zone,
simply slide the switch to the
Off position and the L.E.D. will
no longer illuminate.
Power Adaptor
This massager is powered by
a custom 120 volt AC home
adaptor.
Massage
Motors
10 Motor Full Body Massager with Heat
MMP200TL 4/4/05 2:22 PM Page 7
