4
5
FEATURES
1. The ultimate massager is designed to massage your feet ankles and calves all at the same time
2. Flexible kneading discs create a professional massage experience
3. Strong kneading action penetrates deeply into the muscles of your feet, ankles, and calves
4. Pressure nodes located under your feet stimulate the reflex points on the soles of your feet
5. Personal preference of 3 kneading massage programs, vibration and heating modes
6. The synergetic combination of kneading and vibratory actions gives you a most relaxing and
revitalizing massage experience
7. Strategically located buttons on the switch panel allow you to control the massage function easily
8. Auto shut-off feature activates after the massager has been in use for 15 minutes
9. A pair of detachable fabric cover (with zip) to allow for cleaning to maintain good hygiene
INSTRUCTIONS FOR USE
1. Remove the massager from the packaging and place it on a flat, level surface in front of your
chair
2. Ensure the ON/OFF switch at the back of the unit is set to OFF before inserting the power cord
connector into the machine, then plug the power plug into the mains outlet
3. Switch the ON/OFF switch at the back of the unit to the ON position (4)
4. To activate the massager, press the power switch (6) on
AUTO MODE:
When you turn on the massager on it will be in AUTO mode.
There are 3 different massage programs available in AUTO MODE. To alternate between the
different modes simply press the AUTO button for your preferred massage program. You will
notice that LED display will show P1, P2 or P3 as you press the AUTO button, and the timer will be
counting down from 15 minutes. The unit will turn off after 15 minutes.
MANUAL MODE:
1. When you choose the manual mode it will default to a foot & calf massager. You will notice HA on
the LED mode screen, and the timer will be counting down from 15 minutes. The unit will turn off
after 15 minutes
2. If you press the MANUAL button for a second time the massager will provide a calf only massage
3. If you press the MANUAL button a third time will provide a foot only massage
4. In the MANUAL mode you are also able to operate the heat/and or vibration function.
Simply press the VIBRATION/WARM button to select your preference.
TURNING THE MASSAGER OFF
Simply press the POWER button on the top of the massager. The massager may take a couple of
seconds to stop as it resets to the resting position, enabling you to easily remove your legs.
TIME
MODE
FOOT& CALF
CALF
FOOT
AUTO
HEAT
VIBRATION
VIBRATION
HEAT
MANUAL
POWER
AUTO
CONTROL PANEL
UNIT BODY
HANDLE
POWER SWITCH (BACK)
CLOTH COVER WITH ZIPPER
ON/OFF SWITCH
MASSAGE WITH HEATING
FUNCTION, VIBRATING OR
BOTH
FOOT MASSAGE
CALF MASSAGE OR FOOT &
CALF MASSAGE
MASSAGE YOUR FOOT &
CALF IN THREE MODES
1
6
6
1
4
9
4
2
7
7
8
9
2
5
5
3
8
3
Summary of Contents for FCC-3000AU
Page 4: ...6 7 NOTES NOTES ...
