4
5
(1) Heat key - activates the heat function
(2) Decrease Button - press to decrease the massage intensity
(3) Increase Button - press to increase the massage intensity
(4) Massage Mode - select massage modes: P1 - P5
(5) Power Button - turns unit ON and OFF
Control Panel
LCD Panel
Removable Cover
1
2
3
4
5
USAGE:
1. Connect the provided adaptor to the massager, then plug into the wall outlet.
2. Choose a comfortable chair of equal height. Place your legs into the slots and relax.
3. Press the Power Button to turn the massager on. The unit will beep one time and the LCD will
display “15” and then will begin the countdown.
4. The massager will start operating automatically.
5. There are a total of 5 levels (P1-P5). The default setting is level 1 with Heat (Massage Mode
button will remain BLUE during operation, the and buttons will be flashing and the Heat
will stay on).
• If desired, press the button to move to level 2 ( will flash RED) and the LCD panel will
briefly display P2.
• During the massage, feel free to change levels according to your comfort level.
To increase the level, press the button.
To lower the level, press the button.
The LCD panel will briefly display the selected level.
6. You will feel the air pressure increasing and then releasing during the duration of the massage.
For optimal massage experience, you will feel the change of direction and type of massage.
If you feel that a certain level is too high or too low, use the and buttons to adjust the
level. Refer to point 5 on the previous page.
7. To turn the heat off, press the Heat Mode button (the red light will be off indicating that the
heat function is off).
8. To turn the unit off at any time, just press on the Power Button. The next time you turn it back on,
it will go back to the default setting level 1 (P1) - 15 minutes.
9. Unplug the unit when done using the massager.
CARE AND STORAGE:
- Before cleaning, always make sure to turn off the unit from the control panel first. Then unplug
from the electrical outlet.
- Do not use any abrasive cleaners when cleaning the unit.
- Use a dry cloth when cleaning the massager. Never use the damp cloth to clean the control
panel and massager unit.
- When not in use for long periods of time, store the massager in a dust and moisture free
environment with the cord coiled. Do not wrap the cord around unit.
- Do not leave the unit under direct sunlight for extended periods of time.
- Do not store the massager unit near the heat source.
- If the massager unit malfunctions or brakes down, never try to repair it yourself,
contact Homedics customer service.
Summary of Contents for FCC1050
Page 4: ...6 7 NOTES NOTES ...
