GB
| 14
GB
| 15
REPLACING THE BATTERY
1. Open and release battery cover following indicator on the surface of battery cover.
Before changing the battery be sure the thermometer is already turned off.
2. Press the battery holder lock to release the batteries and replace with 2 new type
AAA batteries. Make sure to align properly as indicated inside the battery cover.
3. Slide the battery cover back in until it snaps in place.
Do not dispose of used batteries in household waste. Take them to special local
collection sites.
4. If the thermometer appears frozen after changing the batteries, remove batteries,
wait 30 seconds and replace batteries again.
WARNING
Do not recharge, disassemble or dispose of in fire.
CLEANING, CARE AND STORAGE
• The lens is very delicate.
• It is very important to protect the lens from dirt and damage.
• The Infrared probe is very delicate. Do not touch or use tools on it. It must be carefully
protected otherwise it will affect the accuracy of the measure.
• Use an alcohol cloth or 70%~75% alcohol wet cloth to clean the thermometer shell,
surface of the device and LCD. When the thermometer probe is dirty or used by
different people, please use alcohol swab or cotton swab moistened with 70%~75%
alcohol to clean and disinfect the probe’s surface of thermometer gently. Do not use
solvents or immerse the device into water or other liquids.
• Always keep the thermometer within the storage temperature range (- 20°C to 55°C
or – 4°F to 131°F) and humidity range (≤93% non-condensing).
• The device requires at least 30 minutes to warm up from the minimum storage
temperature between uses before it is ready for intended use.
• The device requires at least 30 minutes to cool down from the maximum storage
temperature between uses before it is ready for intended use.
• It is recommended to store the thermometer in a dry location free from dust. Do
not expose the thermometer to direct sunlight, high temperature/ humidity or any
extreme environment, otherwise the function will be reduced.
