6
G
B
INSTRUCTIONS FOR USE:
Massage Function
1. Remove the power cord and remote from the storage pouch and connect to the plugs on the cushion
(Figure 1).
2. Plug the appliance into a 220-240V mains outlet.
3. To turn on, press power button once (Figure 2).
4. To activate Shiatsu massage, press Shiatsu button once. To change direction press again (Figure 2).
5. To activate massage speed, press
+/-
button (Figure 2).
6. To activate soothing heat with the massage, press the heat button (Figure 2). Massage heads will glow
red (Figure 3). Allow a few moments for the heating action to warm up.
7. Flip flap back for a more intense massage (Figure 6).
8. When finished press the power button again to turn off all massage and heat functions and unplug
the pillow.
9. Massager can be used as a decorative scatter cushion when not in use (Figure 7).
NOTE:
• The Shiatsu Pillow has spring loaded adjustable angle for ergonomic use on the neck, back, shoulders,
thighs and calves (Figures 4 and 5).
• Only gentle force should be exerted against the pillow in order to eliminate risk of injury.
• There is a 15 minute auto shut-off on this appliance for your safety. This feature should not
be considered as a substitute for ‘OFF’. Always remember to switch the appliance off when not in use.
• Take care to position the product where it will not damage wooden or upholstered surfaces.
• You may soften massage force by placing a towel between yourself and the unit.
CAUTION:
To avoid pinching do not lean on Shiatsu back massage mechanism in the pillow when adjusting your
body position.
Do not jam or force any part of your body in the moving massage mechanism.
Figure 2
Figure 4
Figure 3
Figure 1
Figure 5
Figure 6
Figure 7
IB-SP1000HEU-0512-01_Layout 1 14/05/2012 15:36 Page 6
All manuals and user guides at all-guides.com
