5
7. Treat the target area for a short period of time, and then move to
another area. NEVER treat the same area longer than 3 minutes.
CAUTION: As stated in the “IMPORTANT SAFEGUARDS” section of
this manual, NEVER use this appliance on or near the eyes, temples
or other highly sensitive areas.
8. Do Not use this product for more than 15 minutes at a time.
9. When treatment is completed, turn the unit off and unplug the
power supply. Store the unit properly in a cool, dry place.
NOTE: For added protection of your unit, when the power is on
but no function is selected or the HEAT function is chosen with
no massage function selected, the unit will automatically shut off
after 15 minutes.
Auto-Spacing Features
The spacing between the massage heads can be adjusted to fit various
body frames and areas (See Figure 2). Turn the unit on and simply
push the button on the underside of the massager to adjust the spacing
between the massage heads (See Figure 3). They will continue to cycle
in and out as a long as the button is held down. As soon as you find
your desired spacing for maximum comfort, release the button.
To Change Attachments
Your massager comes with 4 custom massage head attachments. Each
set is a different firmness:
• Firm (light grey)
• Medium (medium grey)
• Soft (black)
• Heat (red)
To remove the massage heads from the unit, rotate each counterclockwise.
Rotate clockwise to fasten the massage heads. (See Figure 4.) Unplug
from outlet before putting on or taking off attachments.
• This product is a non-professional appliance designed to provide
soothing massage to worn muscles. DO NOT use this product as
a substitute for medical attention.
• DO NOT use this product before bed. The massage has a
stimulating effect and can delay sleep.
• NEVER use this product while in bed.
• This product should NEVER be used by any individual suffering
from any physical ailment that would limit the user’s capacity to
operate the controls.
• This unit should not be used by children or invalids without adult
supervision.
• Use of this product should be pleasant and comfortable. Should
pain or discomfort result, discontinue use and consult your
physician.
Instructions for Use
To reduce the risk of electric shock,
t
his appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper
outlet. DO NOT change the plug in any way.
1. This unit is powered by and comes with a UL-approved cord. Untie
cord strap, extend cord and insert plug into 120-volt household
electrical outlet to power unit.
2. To turn unit on, press POWER button located above handle.
A corresponding LED light will illuminate to indicate all selections.
(See Figure 1).
3. Choose the desired massage option: steady or program.
4. For steady massage, press MASSAGE button. To increase or
decrease the massage intensity level, press the up or down arrows on
each side of the MASSAGE button. The intensity level is indicated by
the LED lights in the center of the program panel.
5. For a programmed massage, press the PROGRAM button on the
upper left side. Choose any of the three program options:
• P1 provides slow, steady percussion action to relax and revitalize.
• P2 provides intense massage action to penetrate and soothe.
• P3 provides short, quick bursts for energizing stimulation.
An interval level may be chosen by pressing the INTERVAL button on
the upper right side. There are three interval options: I1 (low), I2
(moderate) and I3 (high).
6. Gently apply massage heads to the area you wish to treat, and move
slowly in a circular motion.
4
Figure 1
Figure 4
P1
P2
P3
Programs:
Figure 3
Button
Caution:
Never use the
heat feature
without the
proper
attachment.
Figure 2
PA-350HBL 10/19/04 11:22 AM Page 5
