4
5
QUICK START GUIDE:
Take the air purifier out of the box and remove the clear, protective plastic bag.
• Place the air purifier on a firm, level surface.
• Make sure the air purifier is off and unplugged to confirm that the filters are firmly in place and did not
become loose during shipping.
1. To check filters, open the rear cover by gently pushing down on the release tab on the top of the rear grill
cover. (Fig. 1)
2. Open the grill cover outward until the tabs at the bottom of the grill cover easily slide away from the unit. (Fig.
2)
3. The True HEPA filters will be resting inside the unit. Make sure the filters are firmly seated inside of the unit.
(Fig. 3)
4. Locate the PetPlus Odour Filters in the rear grill cover. Remove the PetPlus filters from the plastic bags they
are shipped in and set aside. Check to make sure the Pre-Filter is seated in place on the frame of the grill
cover. (Fig. 4) Then place the PetPlus Odour Filters back into the grill cover, seating them on the rails, with the
pull tabs facing outward at the top of each filter. (Fig. 5)
5. Place the tabs at the bottom of the grill cover into the base of the unit. Gently push the grill cover back into
place until you hear a click sound indicating that the grill cover is firmly latched. (Fig. 6)
Connect the power cord into a standard AC outlet.
HOW TO USE:
1. ON/OFF AND SPEED SETTINGS
To turn the air purifier on, press the ON/OFF button on the control panel.
When the air purifier is on, the ON/OFF button on the control panel will be lit and the air purifier will start to
operate on LOW speed.
Once the air purifier is ON, press the SPEED+ button to increase the fan speed to the MED setting. Press again to
increase the fan speed to HIGH setting. To decrease the fan speed, press the SPEED– button until your desired
setting is reached. The fan speed setting is indicated by the illuminated ring around the paw symbol.
To turn the air purifier OFF, simply press the ON/OFFbutton on the control panel.
2. TIMER
There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight) hours, and 12 (twelve) hours. To
activate the timer press the TIMER+ button on the control panel. Each time the + button is pressed, it will display
the successive settings. To return to a setting already passed, press the TIMER– button. Once a timer setting has
been selected, it will remain displayed on the TIMER screen. To operate continuously, cycle down through all
timer settings until no timer setting is displayed.
3. OSCILLATION
To activate the oscillation feature, press the button. To stop oscillation, press the button a second time. The
unit will not automatically realign with foot when oscillation is stopped. To achieve alignment, stop oscillation at
the moment the body becomes aligned with the foot.
4. REPLACE HEPA FILTER
The REPLACE HEPA FILTER indicator illuminates when it is time to replace the True HEPA Filters.
5. REPLACE ODOUR FILTER
The REPLACE ODOUR FILTER indicator illuminates when it is time to replace the PetPlus Odour Filters.
REPLACING FILTERS:
REPLACING TRUE HEPA FILTERS
For optimal performance, replace every 12 months under normal usage conditions. Once the True HEPA filters
have been replaced, press and hold the REPLACE HEPA FILTER button until it beeps to reset the indicator.
To purchase genuine HoMedics replacement True HEPA filters, model ATOFLAU, go back to your retailer where
you purchased your air purifier, or visit www.homedics.com.au.
REPLACING PETPLUS ODOUR FILTERS
For optimal performance, replace every 6 months under normal usage conditions. Once the Odour Filters have
been replaced, press and hold the REPLACE ODOUR FILTER button until it beeps to reset the indicator.
To purchase genuine HoMedics replacement PetPlus Odour filters, model ATPETODRAU, go back to your retailer
where you purchased your air purifier, or visit www.homedics.com.au.
Quick Start Guide
• Take the air purifier out of the box and remove the clear, protective plastic bag.
• Place the air purifier on a firm, level surface.
• Make sure the air purifier is off and unplugged to confirm that the filters are firmly in
place and did not become loose during shipping.
1. To check filters, open the rear cover by gently pushing
down on the release tab on the top of the rear grill
cover. (Fig. 1)
2. Open the grill cover outward until the tabs at the bottom
of the grill cover easily slide away from the unit. (Fig. 2)
3. The True HEPA filters will be resting inside the unit. Make
sure the filters are firmly seated inside of the unit. (Fig. 3)
4. Locate the PetPlus Odor Filters in the rear grill cover.
Remove the PetPlus filters from the plastic bags they
are shipped in and set aside. Check to make sure the
Pre-Filter is seated in place on the frame of the grill
cover. (Fig. 4) Then place the PetPlus Odor Filters back
into the grill cover, seating them on the rails, with the pull
tabs facing outward at the top of each filter. (Fig. 5)
5. Place the tabs at the bottom of the grill cover into the
base of the unit. Gently push the grill cover back into
place until you hear a click sound indicating that the grill
cover is firmly latched. (Fig. 6
)
Connect the power cord into a standard AC outlet.
Note: Unit will not operate unless filters and grill cover are properly installed.
Filter Guide
Pre-Filter:
Collects hair, fur, and other larger airborne contaminants and particles. It
should be vacuumed clean every 30 days.
PetPlus Odor Filters:
Removes odors associated with pet urine, pet feces, litter, and wet
dog. They should be replaced every 6 months.
True HEPA Filters:
Captures and removes up to 99.97% of airborne contaminants. They
should be replaced every 12 months.
Total
Clean
Air Purifier Quick Start and Filter Guide
QS-ATPET02
Fig. 1
Fig. 2
Fig. 6
Fig. 4
Fig. 5
Fig. 3
Quick Start Guide
• Take the air purifier out of the box and remove the clear, protective plastic bag.
• Place the air purifier on a firm, level surface.
• Make sure the air purifier is off and unplugged to confirm that the filters are firmly in
place and did not become loose during shipping.
1. To check filters, open the rear cover by gently pushing
down on the release tab on the top of the rear grill
cover. (Fig. 1)
2. Open the grill cover outward until the tabs at the bottom
of the grill cover easily slide away from the unit. (Fig. 2)
3. The True HEPA filters will be resting inside the unit. Make
sure the filters are firmly seated inside of the unit. (Fig. 3)
4. Locate the PetPlus Odor Filters in the rear grill cover.
Remove the PetPlus filters from the plastic bags they
are shipped in and set aside. Check to make sure the
Pre-Filter is seated in place on the frame of the grill
cover. (Fig. 4) Then place the PetPlus Odor Filters back
into the grill cover, seating them on the rails, with the pull
tabs facing outward at the top of each filter. (Fig. 5)
5. Place the tabs at the bottom of the grill cover into the
base of the unit. Gently push the grill cover back into
place until you hear a click sound indicating that the grill
cover is firmly latched. (Fig. 6
)
Connect the power cord into a standard AC outlet.
Note: Unit will not operate unless filters and grill cover are properly installed.
Filter Guide
Pre-Filter:
Collects hair, fur, and other larger airborne contaminants and particles. It
should be vacuumed clean every 30 days.
PetPlus Odor Filters:
Removes odors associated with pet urine, pet feces, litter, and wet
dog. They should be replaced every 6 months.
True HEPA Filters:
Captures and removes up to 99.97% of airborne contaminants. They
should be replaced every 12 months.
Total
Clean
Air Purifier Quick Start and Filter Guide
QS-ATPET02
Fig. 1
Fig. 2
Fig. 6
Fig. 4
Fig. 5
Fig. 3
Quick Start Guide
• Take the air purifier out of the box and remove the clear, protective plastic bag.
• Place the air purifier on a firm, level surface.
• Make sure the air purifier is off and unplugged to confirm that the filters are firmly in
place and did not become loose during shipping.
1. To check filters, open the rear cover by gently pushing
down on the release tab on the top of the rear grill
cover. (Fig. 1)
2. Open the grill cover outward until the tabs at the bottom
of the grill cover easily slide away from the unit. (Fig. 2)
3. The True HEPA filters will be resting inside the unit. Make
sure the filters are firmly seated inside of the unit. (Fig. 3)
4. Locate the PetPlus Odor Filters in the rear grill cover.
Remove the PetPlus filters from the plastic bags they
are shipped in and set aside. Check to make sure the
Pre-Filter is seated in place on the frame of the grill
cover. (Fig. 4) Then place the PetPlus Odor Filters back
into the grill cover, seating them on the rails, with the pull
tabs facing outward at the top of each filter. (Fig. 5)
5. Place the tabs at the bottom of the grill cover into the
base of the unit. Gently push the grill cover back into
place until you hear a click sound indicating that the grill
cover is firmly latched. (Fig. 6
)
Connect the power cord into a standard AC outlet.
Note: Unit will not operate unless filters and grill cover are properly installed.
Filter Guide
Pre-Filter:
Collects hair, fur, and other larger airborne contaminants and particles. It
should be vacuumed clean every 30 days.
PetPlus Odor Filters:
Removes odors associated with pet urine, pet feces, litter, and wet
dog. They should be replaced every 6 months.
True HEPA Filters:
Captures and removes up to 99.97% of airborne contaminants. They
should be replaced every 12 months.
Total
Clean
Air Purifier Quick Start and Filter Guide
QS-ATPET02
Fig. 1
Fig. 2
Fig. 6
Fig. 4
Fig. 5
Fig. 3
Quick Start Guide
• Take the air purifier out of the box and remove the clear, protective plastic bag.
• Place the air purifier on a firm, level surface.
• Make sure the air purifier is off and unplugged to confirm that the filters are firmly in
place and did not become loose during shipping.
1. To check filters, open the rear cover by gently pushing
down on the release tab on the top of the rear grill
cover. (Fig. 1)
2. Open the grill cover outward until the tabs at the bottom
of the grill cover easily slide away from the unit. (Fig. 2)
3. The True HEPA filters will be resting inside the unit. Make
sure the filters are firmly seated inside of the unit. (Fig. 3)
4. Locate the PetPlus Odor Filters in the rear grill cover.
Remove the PetPlus filters from the plastic bags they
are shipped in and set aside. Check to make sure the
Pre-Filter is seated in place on the frame of the grill
cover. (Fig. 4) Then place the PetPlus Odor Filters back
into the grill cover, seating them on the rails, with the pull
tabs facing outward at the top of each filter. (Fig. 5)
5. Place the tabs at the bottom of the grill cover into the
base of the unit. Gently push the grill cover back into
place until you hear a click sound indicating that the grill
cover is firmly latched. (Fig. 6
)
Connect the power cord into a standard AC outlet.
Note: Unit will not operate unless filters and grill cover are properly installed.
Filter Guide
Pre-Filter:
Collects hair, fur, and other larger airborne contaminants and particles. It
should be vacuumed clean every 30 days.
PetPlus Odor Filters:
Removes odors associated with pet urine, pet feces, litter, and wet
dog. They should be replaced every 6 months.
True HEPA Filters:
Captures and removes up to 99.97% of airborne contaminants. They
should be replaced every 12 months.
Total
Clean
Air Purifier Quick Start and Filter Guide
QS-ATPET02
Fig. 1
Fig. 2
Fig. 6
Fig. 4
Fig. 5
Fig. 3
