background image

PRODUCT FEATURES: 

4

5

fig. 1

Round massage head

CHARGING YOUR DEVICE

1.  To charge the product, plug the charging cable into 

a USB socket and connect the cable to the charging 

socket on the bottom of the handle (fig.2).  

Please use Australia approved power adopter  

to power the product.

2.  Once the charging cable is connected, the charging 

indicator LED will illuminate and blink red. As soon 

as the device is fully charged the LED indicator will 

change to blue. 

3.  Once the product is fully charged, disconnect it from 

the power supply. 

4.  The product requires 5-6 hours of charging for a full 

charge and will last for approximately 1 hour of use. 

USING YOUR DEVICE

1. 

Select the desired massage head and fasten it into 

the socket on the front of the massager (fig.3). It 

should be finger tight only as overtightening may 

cause damage to the product. 

2. 

Press and hold the power on/off/power level button 

for 3 seconds to turn the device on.

3. 

Pressing the on/off/power button again will cycle 

through the power levels: 

• Press x 1: LO 

• Press x 2: MID 

• Press x 3: HI 

• Pressing the button again will repeat this 

  sequence

4. 

Gently move the massage head over the part of the 

body you wish to massage at first, then gently apply 

more pressure as desired. If you are a first time 

user it is recommended that you start on power 

level 1 and press gently. 

5. 

A long press on the on/off/power button for  

1 second will turn the massager off. 

6. 

The product cannot be used while charging 

 

DO NOT USE THE PRODUCT FOR OVER 30 
MINUTES CONTINUOUSLY. 

IF THE PRODUCT IS USED FOR OVER 30 
MINUTES IT MAY TRIGGER THE HEAT 
PROTECTION FEATURE AND STOP 
AUTOMATICALLY. 

PLEASE WAIT FOR AT LEAST 30 MINUTES FOR 
THE PRODUCT TO COOL OFF BEFORE 
RE-USING. 

CLEANING YOUR DEVICE.

•  Make sure the device is unplugged from any power 

supply and allow to cool before cleaning. Clean only 

with a soft, slightly damp sponge. 

•  Never allow water or any other liquid to come into 

contact with the appliance.

•  Do not immerse in any liquid to clean. 
•  Never use abrasive cleaners, brushes, glass/furniture 

polish, paint thinner, etc to clean.

INSTRUCTIONS FOR USE:

fig. 2

fig. 3

Conical massage head

U-shaped massage head

On/off/power 
button

USB charging cable

Adaptor plug not included

Operation 

indicator light

Charging 

indicator LED

Power socket

Summary of Contents for PGM-200-AU









Reviews: