8
LISTENING TO THE RADIO
Note:
For best reception, fully unwind the wire antenna. DO NOT strip, alter or attach to other antennas.
1. To listen to the radio, press the POWER button located on top of the unit.
2. Press the RADIO button on the unit until FM icon and station frequency appears on the display.
3. Use the TUNE selector button on the top of the unit to select desired station. For auto seek press
and hold TUNE selector for 2 seconds and the tuner will find the next station with the strongest frequency.
4. Press the POWER button to turn radio off.
SOUNDS
1. To listen to the Nature Sounds, press the POWER button on the top of the unit.
2. Press the SOUND button to scroll through the sounds.
3. Your sound selection will illuminate on the LCD screen.
SLEEP FEATURE
While listening to radio or nature sounds press the SNOOZE/DIM/SLEEP button to activate the
sleep feature. This allows you to set a sleep timer for 15, 30, 45 or 60 minutes. Once set, the
unit will continue playing for the set length of time, then will automatically turn off.
PROJECTOR FUNCTION
The Sound Spa is equipped with a feature that allows you to project the TIME on any flat surface.
1. To turn projector on, press the PROJECTOR button on top of unit.
2. Carefully rotate the PROJECTOR device (Fig. 5),up to a 180 degree turn, to change
where the time image gets projected.
3. To adjust the focus, carefully turn the round end of the projector lens to the desired focus.
4. Press PROJECTOR again to change the orientation of the time projection.
5. Press the PROJECTOR button again to turn off projection.
VOLUME CONTROL
To adjust the volume, use the VOLUME buttons located on the top of the unit.
DISPLAY DIMMER CONTROL
Press the SNOOZE/DIM/SLEEP bar to adjust the backlight intensity of the clock display.
The POWER selector button needs to be off to use the dimmer control.
BACKUP BATTERY
This alarm clock is equipped with a battery backup feature (1 CR-2032 battery included and already
installed) to keep the clock time and alarm settings during power outage. The battery is located on the
bottom of the unit for easy access (small Phillips head screw driver required, not included). Please be
sure to remove the pull tab before first use.
Note:
When back up battery is low or if this tab is not removed, a low battery indicator on the display
will appear.
