5
I
GB
HOW TO USE:
FAN SPEED
OSCILLATION ON/OFF
POWER ON/OFF
REPLACE HEPA FILTER/RESET
TIMER
REPLACE ODOUR FILTER/RESET
1. On/Off and Speed Settings
To turn the air purifier on, press the ON/OFF
button on the control panel.
When the air purifier is on, the ON/OFF button on the control panel will be lit and the air purifier will start to operate on LOW
speed.
Once the air purifier is ON, press the SPEED+ button to increase the fan speed to the MED setting. Press again to increase the fan
speed to HIGH setting. To decrease the fan speed, press the SPEED– button until your desired setting is reached. The fan speed
setting is indicated by the illuminated ring around the paw symbol.
To turn the air purifier OFF, simply press the ON/OFF
button on the control panel.
2. Timer
There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight) hours, and 12 (twelve) hours. To activate the timer
press the TIMER+ button on the control panel. Each time the + button is pressed, it will display the successive settings. To return
to a setting already passed, press the TIMER– button. Once a timer setting has been selected, it will remain displayed on the
TIMER screen. To operate continuously, cycle down through all timer settings until no timer setting is displayed.
3. Oscillation
To activate the oscillation feature, press the
button. To stop oscillation, press the button a second time. Unit will not
automatically realign with foot when oscillation is stopped. To achieve alignment, stop oscillation at the moment the body
becomes aligned with the foot.
4. Replace HEPA Filter
The REPLACE HEPA FILTER indicator illuminates when to replace the True HEPA Filters.
5. Replace Odour Filter
The REPLACE ODOUR FILTER indicator illuminates when to replace the PetPlus Odour Filters.
