6
7
Caution:
All servicing
of this fountain
must be
performed
by authorized
HoMedics
service
personnel only.
Troubleshooting
If the pump fails to operate, check the following:
Check the circuit breaker, or try a different outlet
to make sure the pump is getting electrical power.
Note:
Always disconnect from electrical outlet before
handling the pump.
If the pump gurgles, spews, or “burps”:
Check the water level to make sure the pump has enough water
to function.
Obtaining a desired water level:
Check the water level daily the first week to measure the rate of
evaporation; refill with water as needed.
If water is splashing outside the fountain:
Adjust the flow control valve to a lower setting on the pump.
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
