7
The sleep mode will not work when the unit is in the dehumidifying or fan mode. When
the water unit is full or in standby mode the sleeping mode will be cancelled
TIMER
: Press to enter into the timer setting mode. Use the up/down buttons to set up
the on/off time from 1 to 24 hours. The timer mode indicator will light up to show the
unit is in this mode
Operating
Cooling mode
Press MODE to select cooling mode, cooling mode indictor turns on.
Press UP or DOWN to adjust temperature (from 16
℃
to 31
℃
).
Press FAN to select high or low fan speed.
Fan mode
Press MODE to select fan mode, fan mode indicator turns on.
Press FAN to select high speed or low speed.
Dehumidifying mode
Close all the doors and windows, in order to obtain the best dehumidifying effect
Press MODE to select dehumidifying mode, the dehumidifying mode indicator
turns .on. The fan speed is low in this mode and cannot be adjusted
Water Drainage
When there is excessive water condensation inside the unit, the “WF” indictor will
flash, the unit stop running and a buzzer sound. The unit will not work until the water
has been drained.
To drain the unit
Unplug the unit from the power source
Place a shallow dish under the drain plug
Remove the drain plug
Once the water has drained, replace the plug and turn the unit back on.
