Mincing Meat
1.
Cut all food into small pieces (20mm x 20 mm x 60 mm) so that they fit easily into the
Hopper opening.
2.
Ensure that the Homegear Meat Grinder is switched off, and plug the unit into the power
socket. Switch the Homegear Meat Grinder on.
3.
Feed food into the Hopper Plate (see figure 7).
Reverse Function
1.
In case of jamming switch off the Homegear Meat Grinder and position the switch into the R
position.
2.
Doing this will rotate the snake in the opposite direction leading to the unblocking.
3.
If this does not work switch off the Homegear Meat Grinder, unplug from the power supply
and clean it.
Cleaning
1.
Switch the Homegear Meat Grinder off.
2.
Make sure the motor has stopped completely.
3.
Disconnect from the power supply.
4.
Disassemble by reversing the process of assembly.
5.
To remove the cutting plate easily, place a screwdriver between
the cutting plate and the head as illustrated and lift it up (see
figure 12)
6.
Press the fasten knob, move the head as per direction (see figure
13) then remove the head.
7.
Remove any excess meat and wash each part in warm soapy
water.
8.
Never immerse the motor housing in water only ever wipe it with
a damp cloth.
Summary of Contents for HBHG-0200
Page 1: ...1200W Meat Grinder...
