Step 3 - Wall Hanging
1.
Place 1 EVA dot on each corner of the Homegear Jewellery Cabinet.
2.
Determine the desired location to hang the Homegear Jewellery Cabinet and mark the entry
point for the 2 Wall Anchors.
3.
Place the Wall Anchors into the wall at the marked spots making sure the anchors are level.
To install the anchors use a Phillips Head Screwdriver and screw both Wall Anchors into the
wall.
4.
Open the front of the Homegear Jewellery Cabinet and locate the 2 red arrows inside. These
are the entry points for the 2 Wall Screws. Push both Wall Screws through the black foam
from inside the Homegear Jewellery Cabinet and into the Wall Anchors.
Summary of Contents for JTHG-300CD
Page 1: ...Mirrored Jewellery Cabinet...
