3
READ ALL INSTRUCTIONS
BASIC SAFETY PRECAUTIONS
■
Do not operate a chain saw with one hand! Use a
firm grip with thumbs and fingers encircling the
chain saw handles. Serious injury to the operator,
helpers, bystanders, or any combination of these
persons may result from one-handed operation. A
chain saw is intended for two-handed use.
■
Always be aware of what you are doing when using
the chain saw. Use common sense. Do not operate
the chain saw when you are tired, ill, or under the
influence of alcohol, drugs, or medication.
■
Stay alert and pay attention to what you are doing.
Use common sense when using this unit.
■
Keep all parts of your body away from the saw
chain when the unit is running.
■
Always carry the chain saw by the front handle with
the unit stopped and the guide bar and saw chain
positioned to the rear. When transporting your
chain saw, use the appropriate guide bar scabbard.
■
Never let anyone use your chain saw who has not
received adequate instructions in its proper use.
This applies to rentals as well as privately owned
saws.
■
Before you start the unit, make sure the saw chain
is not contacting any object.
■
Stop the chain saw before setting it down. Do not
leave the unit running unattended.
■
To avoid accidental starting, never carry the unit
with your finger on the trigger.
■
Maintain the unit with care. Keep the cutting edge
sharp and clean for best performance and to
reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Inspect the
battery charger cord periodically, and if damaged,
have it replaced or repaired by an authorized
service dealer.
■
Keep handles dry, clean, and free of oil and grease.
■
Do not operate a chain saw that is damaged,
improperly adjusted, or not completely and securely
assembled. Chain should stop turning when the
trigger is released. If the chain turns after the
trigger has been released, have the unit serviced
by your nearest Homelite service dealer.
■
Check for damaged parts. Any part or guard that
has been damaged should be carefully checked to
determine that it will operate properly and perform
its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may
affect its operation. A guard or other part that is
damaged should be properly repaired or replaced
by an authorized service dealer unless otherwise
indicated elsewhere in this manual.
■
All chain saw service, other than the items listed in
the operation and maintenance sections, should be
performed by your nearest Homelite service dealer.
■
Do not use in the rain, snow or wet conditions.
■
Always maintain a proper stance.
■
Do not adapt your powerhead to a bow guide or
use it to power any attachments or devices not
listed for your saw.
■
Do not cut vines and/or small underbrush.
SAFETY APPAREL
■
Wear snug fitting clothing. Always wear heavy, long
pants, overalls, jeans or chaps made of cut resis-
tant material or ones that contain cut resistant
inserts. Wear non-slip safety footwear. Wear non-
slip heavy duty gloves to improve your grip and to
protect your hands. Do not wear jewelry, short
pants, sandals, or go barefoot. Do not wear loose
fitting clothing, which could be drawn into the motor
or catch the chain or underbrush. Secure hair so it
is above shoulder level.
■
Wear eye protection which is marked to comply
with ANSI Z87.1 as well as hearing and head
protection when operating this equipment.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Do not attempt to operate this unit until you have
read thoroughly and understand completely all
instructions, safety information, etc. contained in
this manual. Failure to comply can result in
accidents involving fire, electric shock, or
serious personal injury.
Summary of Contents for UT34010
Page 33: ...33 NOTES ...
