26
ENGLISH
6.10
Installation of the side cover of water gutter
Fasten the side cover at both sides ot the water gutter. Tighten the cross round screws (A).
Screw A
Side cover
6.11
Fixing canopy on the wall
Draw a horizontal line in the position of required distance by using a long ruler, sprit level and chalk,
fixing the wall bracket (11) at this marked position. Put the main brackets of rain canopy into wall
bracket holder (11). Use expansion screw (E). Tighten up the nuts.
The quantity of the wall bracket is based on the canopy width.
Model
DCY190
DCY270
Roof width
1.90 m
2.70 m
Jointed block
3 piece
4 piece
Distance between
carrier
approx 800mm (Attention : check the distances on the
fully assembled canopy before drilling the holes)