46
Restore factory settings
7
Restore factory settings
The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the device, proceed as
follows:
• Press and hold down the system button
(A)
for 4
seconds with a pointed object (e.g. a pen) until
the LED
(A)
starts flashing orange quickly (
see
figure 9
).
• Release the system button again.
• Press and hold down the system button again
for 4 seconds, until the LED lights up green (
see
figure 10
).
• Release the system button to finish the procedure.
The device will perform a restart.
After the restart, you can
again integrate your device into your Homematic IP system.
8
Maintenance and cleaning
The product does not require any maintenance.
Enlist the help of an expert to carry out any
repairs.
Clean the device using a soft, lint-free cloth that is clean
and dry. Do not use any detergents containing solvents,
as they could corrode the plastic housing and label.
Summary of Contents for HmIPW-BRC2
