YD-F600 Multi-coin Microcomputer Coin Acceptor Instructions.
(factory fitted option at extra cost – not included with every machine)
YD-F600 Features:
1. The YD-F600 can be programmed to accept one type of coin or token only.
2. The YD-F600 can accept a wide variety of coin & token types. It operates by learning the
features specific to the sample coins used when programming.
3. High accuracy & stability ensures correct identification of old and new coins/tokens of any
denomination. Have 20 coins to hand from different years and in various condition for best results.
3. Coin inhibit input allows the YD-F600 to reject all coins.
Suitable coin diameter:
18~32mm
Suitable coin thickness:
1.4~3.5mm
Power:
12VDC +- 20%
Current draw:
40ma (standby) 350ma (when activated by a coin insertion)
Operating Temperature:
-30° C~+80° C
Inhibit Operation Voltage:
>0.5V
Programming:
1. Ensure all switches are in the normal position.
2. Press AND HOLD the programming switch (above the LED) for 3 seconds – the LED will blink
slowly – RELEASE the switch, then press AND HOLD the switch a second time for a further 3
seconds and the LED will blink quickly. The unit is now ready to program with your desired coin or
token.
3. Keeping the YD-F600 level, insert the desired coin or token you wish to program, one at a time.
You should prepare at least 20 examples of the desired coin/token and preferably pieces in differing
condition and from different years to ensure the YD-F600 is best positioned to accept ALL valid
coins.
4. The LED will continue to blink quickly as you keep inserting the coins – the YD-F600 is learning
the differing specifics of the coins you are inserting and, when it is satisfied, it will automatically
exit programming mode and the LED will become steady ON again.
5. The YD-F600 is now ready to use.
7
Summary of Contents for Spinal Tap Pinball
