11/19
ALFA IN a.s.
©
www.alfain.eu
6. Pull slowly the starter grip until resistance shows. Then smoothly, but fast
enough pull the starter handle (so as to avoid excessive stress on the
starter rope guide pulley and starter)
.
Repeat until the device does not
start.
7. After starting the device handle you return to its initial position.
8. After a few seconds you turn the choke to the OPEN position - work
equipment picks up speed, and its operation is fluent.
Decommissioning
1. Unload motor by disconnecting all load.
2. Let the engine run for 30 to 60 seconds flat.
3. Turn the engine switch to the OFF position.
4. Fuel valve switch from ON to OFF position.
7. MAINTENANCE
Good maintenance is essential for safe, economical, and trouble-free
operation.
VAROVÁNÍ!
Exhaust gas contains poisonous carbon monoxide. Shut off the engine
before performing any maintenance. If the engine must be run, make
sure the area is well ventilated.
Periodic maintenance and adjustment are necessary for keeping the
generator in good operating condition. Perform the service and inspection
at the intervals shown in the Maintenance schedule below:
For engine maintenance - detailed service procedures are listed in the
user manual or the user manual engine.
Maintenance, excluding maintenance described in this manual should be
made by an authorized service partner.
The generator does not require any servicing or maintenance by the
customer.
Maintenance - schedule
WARNING! RISK OF RANDOM START!
Random start of engine by maintenance can cause severe injury. Disconnect
the spark plug cable before attempting any maintenance.
Activity
Periodicity
Check, if necessary Top up the fuel tank
daily or before every start
