sync
Network Gateway for Qmotion Automated Shades
www.qmotionshades.com
Verify the contents of the
Qsync package and gather
needed materials:
1. Ethernet cable.
2. Qsync
3. Antenna
4. Power Adapter
(Color may vary.)
Attach the antenna to the
Qsync by screwing it onto
the coaxial connector on
Qsync’s back plate. For
best performance, position
the antenna as high up
as possible and without
obstructions between it and
the shades.
Plug the power cord into
Qsync’s front plate. Then
plug it into a 120VAC 60Hz
outlet.
1
2
3
4
Coax Connector
Power connector
