HomeSeer | 10 Commerce Park North, Unit 10 | Bedford, NH 03110 | HomeSeer.com | Doc: HS
-
CAM
-
I
-
en
-
v2.0
4.
On the next screen, only the camera name should be changed. After pressing Next, a QR code will be created. Increase the
brightness of your mobile device to max, then place the QR code directly in front of the lens of the HS
-
CAM
-
O. Slowly move
the screen away from the camera until the code is recognized.
5.
The camera is now connected to the app! Tap the camera name to view the feed.
Changing the Username and Password
In the HS3 web interface, navigate to Tools > Setup, then click on the Cameras tab. Here, the HS
-
CAM
-
I will be listed with the
name it was given during setup. Click the
Change Username and Password
button, and the software will provide the forms for
changing the username and password.
Removing the Camera from HomeSeer
In the HS3 web interface, navigate to Tools > Setup, then click on the Cameras tab. Identify the camera you would like to re-
move, then click the symbol
at the end of the row of the camera to be removed. If the camera is still powered on and con-
nected to your network, the camera will re
-
appear.
Performing a Factory Reset
To perform a factory reset on the HS
-
CAM
-
I, tilt the lens all the way up, so that it is pointing toward the ceiling. With the reset
button exposed, press it for 15 seconds and the red LED will start to blink quickly, indicating that the reset has been completed.
This will revert the username and password to the defaults printed on the sticker located on the bottom of the camera.
SPECIFICATIONS
Wi
-
Fi Compatibility
2.4GHz /b/g/n
Audio Functionality
Two way (with 3rd party app)
Camera Resolution
1080p (1920x1080)
Pan and Tilt Range
240° horizontal
60° vertical
Night Vision Distance
19.5’
6m
Lens Info
3.6mm lens
4 IR LED
’
s
Power Consumption
DC 5V 6W
Dimensions
3.1”
x
3.1”
x
4.3”
79.5 x 79.5 x 110mm
