1
HS-FLS100-G2 | Z-Wave Plus Floodlight Sensor
Be sure to visit our website for the most up-to-date information about this product:
https://homeseer.com/support-home/
Overview
The HS-FLS100-G2 is a PIR module
that’s designed to retrofit onto existing
outdoor floodlights. It features a PIR sensor to detect motion through movement of
heat sources and a LUX sensor for determining brightness of its surroundings. It is
equipped with Z-Wave Plus wireless communication capability that will convert an
ordinary motion-activated floodlight into a smart home device.
Conventional Floodlight Mode
HS-FLS100-G2 can be used as a conventional motion-activated floodlight sensor
to power floodlights when motion is sensed during dark hours. Controls are
provided for manual adjustment of LUX sensitivity and floodlight ON times.
Smart Floodlight Mode
When added to a smart home system, HS-FLS100-G2 will send Z-Wave
commands to the smart hub or home controller when motion is sensed and when
the LUX level changes. Likewise, the smart hub or home controller can send
Z-Wave commands back to the HS-FLS100-G2 to turn floodlights ON and OFF.
This added functionality provides a very high level of flexibility not typically
available in conventional motion-activated floodlights.
Smart Sensor Mode
HS-FLS100-G2 can also be installed and used simply as an outdoor motion, LUX
and temperature sensor. Floodlight functionality is not required. This brings some
interesting security and smart home possibilities!
S2 Security
This product supports the S2 security protocol that uses encrypted Z-Wave Plus
messages to communicate to other security-enabled Z-Wave Plus products. A
security-enabled Z-Wave Plus controller must be used in order to fully utilize the
security features of this product.
Product Overview
PIR Lens
Lux knob
LED indicator (hidden behind lens)
Timer Knob
Link button
Threaded arm
Below diagram show a typical assembly of HS-FLS100-G2 on a floodlight fixture
(not provided).
(Wall mount)
(Under Eave mounting)
Note: Please read this entire instruction manual before you start the installation.
