5
Operation
The table below describes 4 main operation modes available.
Refer to Z-wave Configuration section for setting Parameters 1, 4~6.
Control
mode
When sensor triggers
Corresponding action
Lux
sensor
PIR
sensor
Floodlight behavior
Z-wave alert
(if Par. 4 = 1)
PIR
control
(default)
Par.5=1
Par.6=0
Night
Triggered
ON at night, when PIR
triggers, (Par. 1 sets the
ON period)
OFF during Day
Sends alert
whenever PIR
triggers.
Lux
control
only
Par.5=1
Par.6=1
Night
Not
relevant
ON at Night
OFF during Day
Sends alert
whenever PIR
triggers.
Controller
control
Par.5=0
Not
relevant
Not
relevant
ON/OFF controlled by
controller directly
Sends alert
whenever PIR
triggers.
Walk Test
Lux knob
and Timer
knob both
set to "T
Not
relevant
Triggered
On for 5 seconds
Sends alert
whenever PIR
triggers.
Programming
Z-Wave Group
The unit supports either one of two Z-wave Association Groups:
Group 1
: Association with 1 Controller node.
Group 2
: Association with 4 nodes (i.e. end devices such as smart plugs and
other lighting controllers). This allows the PIR detector on the unit to transfer
commands directly to other Z-wave end devices without the participation of the
controller. This has the effect that when its detector triggers, all devices associated
with unit will be operated.
Z-Wave Plus Information
Role Type
Node Type
Installer Icon
User Icon
Slave Always ON
Z-Wave Plus
node
Sensor Notification
Device Type (Home
Security)
Sensor Notification
Device Type (Home
Security)
Association Command Class
Group
Max Node
1
1
2
4
Version
Protocol Library
3 (Slave_Enhance_232_Library)
Protocol Version
ZDK6.82.xx), Z-wave SmartStart supported
Firmware Version
xVy (x=1,y=0 means 1V0)
Hardware Version
1
Manufacturer
Manufacturer ID
Product Type
Product ID
0x000C (HomeSeer)
0x0201
0x000C
AGI (Association Group Information) Table
Group
Profile
Command Class & Command (List)
N bytes
Group Name(UTF-8)
1
General
Device Reset Locally Notification
Notification Report
Binary Report
Sensor Multilevel Report
Basic Report
Lifeline
2
Control
Basic Set
PIR Control
