© 2002 American Honda Motor Co., Inc - All Rights Reserved.
AII 23619 (0205)
5 of 7
17. Unplug the vehicle 10-pin connector from the fuse
box, and plug the two 10-pin connectors of the
keyless entry harness in between.
16. Route the 6-pin connectors of the keyless entry
harness to the switch trim opening. Plug the 6-pin
connectors between the interior light switch and
the interior light switch harness connector.
Reinstall the switch trim.
15. Above the parking brake pedal bracket, locate the
3-pin connector blue-taped to the vehicle harness,
and remove the blue tape to free the connector.
Plug the 3-pin connector of the keyless entry
harness into the 3-pin connector you just freed.
18. Above the fuse box, locate the gray 2-pin
connector blue-taped to the vehicle harness. This
connector is difficult to see, it is behind a gray 4-
pin connector. Pull the gray 4-pin connector down
and out of the clip on the instrument panel
bracket. Remove the blue tape securing the gray
2-pin connector and pull it out.
19. Below the fuse box, locate the brown 2-pin
connector. Plug the keyless entry harness 2-pin
connectors into the brown connector and into the
gray 2-pin connector from step 18. Reinstall the
gray 4-pin connector.
KEYLESS ENTRY HARNESS
VEHICLE
3-PIN
CONNECTOR
BLUE TAPE
PARKING
BRAKE PEDAL
BRACKET
KEYLESS ENTRY HARNESS
3-PIN CONNECTOR
INTERIOR LIGHT
SWITCH HARNESS
CONNECTOR
INTERIOR LIGHT
SWITCH HARNESS
CONNECTOR
SWITCH TRIM
OPENING
KEYLESS ENTRY
HARNESS 6-PIN
CONNECTOR
SWITCH
TRIM
INTERIOR
LIGHT SWITCH
KEYLESS
ENTRY
HARNESS
KEYLESS ENTRY HARNESS
6-PIN CONNECTOR
FUSE BOX
VEHICLE 10-PIN
CONNECTOR
KEYLESS ENTRY
HARNESS
10-PIN CONNECTOR
KEYLESS
ENTRY
HARNESS
VEHICLE 2-PIN
CONNECTOR (Brown)
FUSE
BOX
KEYLESS ENTRY
HARNESS 2-PIN
CONNECTOR
KEYLESS
ENTRY
HARNESS
VEHICLE 4-PIN
CONNECTOR
CLIP
TAPE
VEHICLE 2-PIN
CONNECTOR
(Gray)
