258
Main
tenan
ce
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1.
Remove the cover.
2.
Remove the coupler.
u
It can be removed by pushing the tab.
3.
Rotate the old bulb to the left to remove.
4.
Insert a new bulb into the headlight
assembly and turn it to the right.
5.
Insert the coupler into the connector of the
bulb.
High beam headlight: 60 W (HB3)
Low beam headlight: 55 W (H11 for halogen bulb type)
35W (D4S for high voltage discharge)
■
High Beam Headlight
1
Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the cargo area, have the aiming
readjusted at a dealer or by a qualified technician.
The HB3 and H11 types are halogen bulbs.
When replacing a bulb, handle it by its base, and
protect the glass from contact with your skin or hard
objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
The exterior lights' inside lenses (headlights, brake
lights, etc.) may fog temporarily after a vehicle wash
or while driving in the rain. This does not impact the
exterior light function.
However, if you see a large amount of water or ice
accumulated inside the lenses, have your vehicle
inspected by a dealer.
Cover
Tab
Coupler
Bulb
12 CR-Z-31SZT610.book 258 ページ ２０１１年８月２９日 月曜日 午後８時８分
Summary of Contents for 2012 CR-Z
Page 30: ...28 12 CR Z 31SZT610 book 28 ページ ２０１１年８月２９日 月曜日 午後８時８分 I n f o r m a t i o nP r o v i d e db y ...
Page 68: ...66 12 CR Z 31SZT610 book 66 ページ ２０１１年８月２９日 月曜日 午後８時８分 I n f o r m a t i o nP r o v i d e db y ...
Page 98: ...96 12 CR Z 31SZT610 book 96 ページ ２０１１年８月２９日 月曜日 午後８時８分 I n f o r m a t i o nP r o v i d e db y ...
