313
uu
When Driving
u
BSI (Blind Spot Information) System
*
Driving
Press the BSI OFF button until you hear a beep to turn on and off the system. A
message on the multi-information display appears for five seconds and indicates
that the system is on or off.
When BSI is off, the BSI indicator in the instrument panel stays on.
BSI is in the previously selected on or off setting each time you start the engine.
■
BSI On and Off
1
BSI (Blind Spot Information) System
Turn the system off when towing a trailer. The system
does not work properly for the following reasons:
•
The added mass tilts the vehicle and changes the
radar coverage.
•
The trailer itself can be detected by the radar
sensors, causing the BSI alert indicators to come
on.
BSI may be adversely affected when:
•
Objects (guard rails, poles, trees, etc,.) are
detected.
•
An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
•
Driving on a curved road.
•
A vehicle is moving from a far lane to the adjacent
lane.
•
The system picks up external electrical interference.
•
The rear bumper or the sensors have been
improperly repaired or the rear bumper has been
deformed.
•
The orientation of the sensors has been changed.
•
In bad weather (Heavy rain, snow, and fog).
For a proper BSI use:
•
Always keep the rear bumper corner area clean.
•
Do not cover the rear bumper corner area with
labels or stickers of any kind.
•
Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be
repaired, or the rear bumper corner area is strongly
impacted.
BSI
Indicator
Multi-information
display
BSI OFF Button
* Not available on all models
12 US ODYSSEY Revision-31TK86102.book 313 ページ 2015年10月8日 木曜日 午前11時47分