359
uu
Replacing Light Bulbs
u
Fog Light Bulbs
*
Main
tenan
ce
Fog Light Bulbs
*
When replacing, use the following bulbs.
1.
Turn the steering wheel all the way to the
opposite side from the fog light being
replaced.
Passenger side:
Turn the steering wheel
to the left.
Driver side:
Turn the steering wheel to the
right.
2.
Remove the mounting bolt and screws, and
pull the inner fender back.
3.
Remove the coupler.
u
It can be removed by pushing the tab.
4.
Rotate the old bulb to the left to remove.
5.
Insert a new bulb into the fog light
assembly and turn it to the right.
6.
Insert the coupler into the connector of the
bulb.
Fog Light: 55 W (H11)
1
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Screws
Mounting
Bolt
Bulb
Coupler
Tab
* Not available on all models
12 US ODYSSEY Revision-31TK86102.book 359 ページ ２０１５年１０月８日 木曜日 午前１１時４７分
