416
uu
Fuses
u
Inspecting and Changing Fuses
Han
d
lin
g the U
n
expected
Inspecting and Changing Fuses
1.
Turn the ignition switch to LOCK
(
0
. Turn
headlights and all accessories off.
2.
Remove the fuse box cover.
3.
Check the large fuse in the engine
compartment.
u
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4.
Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
1
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Use the charts to locate the fuse in question and
confirm the specified amperage on the fuse label.
2
There is a fuse puller on the back of the engine
compartment fuse box (primary) cover.
Blown Fuse
Blown
Fuse
Fuse Puller
12 US ODYSSEY Revision-31TK86102.book 416 ページ 2015年10月8日 木曜日 午前11時47分