Honda 2013 Civic Sedan Owner'S Manual Download

Page: 320 / 368

If a Tire Goes Flat

Changing a Flat Tire

318

Hand

lin
g t
h

e U

exp

Place the jack under the jacking point
closest to the tire to be changed.

Turn the end bracket (as shown in the
image) clockwise until the top of the jack
contacts the jacking point.

Make sure that the jacking point tab is
resting in the jack notch.

Raise the vehicle, using the jack handle bar
and the jack handle, until the tire is off the
ground.

■

How to Set Up the Jack

How to Set Up the Jack

Do not use the jack with people or luggage in the
vehicle.

Use the jack provided in your vehicle.
Other jacks may not support the weight (“load”) or
their shape may not match.

The following instructions must be followed to use
the jack safely.

•

Do not use while the engine is running.

•

Use only where the ground is firm and level.

•

Use only at the jacking points.

•

Do not get in the vehicle while using the jack.

•

Do not put anything on top of or underneath the
jack.

WARNING

The vehicle can easily roll off the jack,
seriously injuring anyone underneath.

Follow the directions for changing a tire
exactly, and never get under the vehicle
when it is supported only by the jack.

Jack
Handle
Bar

Wheel Nut

Wrench as Jack Handle

Summary of Contents for 2013 Civic Sedan

















































































































































































































































































































































































Search results

Summary of Contents for 2013 Civic Sedan

Reviews:

Related manuals for 2013 Civic Sedan

Brands by name

Popular brands

Honda 2013 Civic Sedan, Owner'S Manual

Search results

Summary of Contents for 2013 Civic Sedan

Reviews:

Related manuals for 2013 Civic Sedan

Brands by name

Popular brands