Honda AFRICA TWIN Owner'S Manual Download

Page: 233 / 377

Connect a certified USB cable to the socket.

Route the USB cable along the recess.

Pass the USB cable through the cover slit

and close the cover.

To prevent the battery from becoming weak

(or dead), keep the engine running while

drawing current from the socket.

To prevent entry of foreign matter into the

socket, be sure to close the cover.

Carefully secure all connected devices, as

vibration may cause damage to them or

they could shift unexpectedly.

NOTICE

•

Using any heat-generating USB devices or

improperly rated USB devices can damage

the socket.

•

Do not use the USB socket in wet conditions,

when or while washing or any other wet

conditions as these will damage the USB

socket.

•

Do not allow the USB's harness to become

pinched or trapped.

•

Do not allow the USB's harness to interfere

with the steering or controls.

20190704203539_32MKS6000_eng_BOOK Page 232 Thursday, July 04 2019 20:57:26 JST

Operation Guide

227

USB cable

Cover

Slit

Recess

Summary of Contents for AFRICA TWIN


























































































































































































































































































































































































Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands

Honda AFRICA TWIN, Owner'S Manual

Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands